With Freedom Dyes, you have license-free access to patented fluorescent dyes. We offer fluorophores spanning the commonly used excitation and emission wavelengths. These dyes can be paired with IDT's proprietary single or dual dark quenchers (ZEN™ and TAO™).
Dye | 5' | Internal | 3' | Excitation (nm) | Emission (nm) | Alternative |
---|---|---|---|---|---|---|
6-FAM (Fluorescein) | details | – | details | 495 | 520 | N/A |
6-FAM (NHS Ester) | details | – | details | 496 | 516 | N/A |
Fluorescein dT | details | details | details | 495 | 520 | N/A |
HEX | details | – | – | 538 | 555 | Yakima Yellow® |
Yakima Yellow | details | - | - | 524 | 551 | HEX |
JOE™ (NHS Ester) | details | – | details | 529 | 555 | MAX (NHS Ester) |
MAX | details | – | details | 524 | 557 | JOE (NHS Ester) |
TET | details | – | – | 522 | 539 | N/A |
Yakima Yellow is registered trademark of ELITech Group; JOE is a trademark of Thermo Fisher Scientific.
6-FAM (Fluorescein): A single isomer derivative of fluorescein. FAM is a commonly used fluorescent dye attachment for oligonucleotides and is compatible with a variety of fluorescence detection equipment. It becomes protonated and has decreased fluorescence below pH 7; it is typically used in the pH range 7.5–8.5. FAM can be attached to 5' or 3' end of oligos.
6-FAM (NHS Ester): A post-deprotection reaction is used to attach this fluorophore to the oligonucleotide. This is commonly used to modify RNA oligos with FAM.
Fluorescein dT: Fluorescein is attached to position 5 of the thymine ring by a 6-carbon spacer arm.
SUN: A VIC® (ThermoFisher Scientific) equivalent (emission maximum of 554 nm) that is recommended for use in multiplexed assays when added to the 5' end of a dual-labeled 5' nuclease probe for qPCR.
HEX: Hexachlorofluorescein is a chemical relative of fluorescein that is commonly used for multiplexed assays with FAM and TET. HEX can be added only to the 5' end of an oligonucleotide.
JOE (NHS Ester): JOE (6-carboxy-4',5'-dichloro-2',7'-dimethoxyfluorescein) is available only as an NHS ester and must be attached to an amino-modified oligonucleotide. JOE is frequently used in multiplex reactions with FAM.
MAX (NHS Ester): Most often used to multiplex with FAM. It can be used as a VIC substitute because its spectral profile is nearly identical to VIC. Importantly, MAX is efficiently excited by either a 488 nm laser or a broad emission light source; therefore, it can be used with most commercial detection platforms.
TET: Tetrachlorofluorescein is a chemical relative of fluorescein that is commonly used for multiplexed assays with FAM and HEX. TET can be added only to the 5' end of an oligonucleotide.
Dye | 5' | Internal | 3' | Excitation (nm) | Emission (nm) | Alternative |
---|---|---|---|---|---|---|
Cy 3 | details | details | details | 550 | 564 | TYE™ 563 |
Cy 5 | details | details | details | 648 | 668 | TYE 665 |
Cy 5.5 | details | – | details | 685 | 706 | TYE 705 |
Cy 3: A standard orange-fluorescent label for nucleic acids used in imaging, flow cytometry, and genomic applications.
Cy 5: A standard far red-fluorescent label for nucleic acids used in imaging, flow cytometry, and genomic applications.
Cy 5.5: Used as a fluorescent label in 5' nuclease probes for qPCR, Scorpion® primers (Premier Biosoft), and Molecular Beacons. Cy 5.5 can also be used to label DNA oligos for use as hybridization probes in other applications, such as fluorescent in situ hybridization (FISH).
Dye | 5' | Internal | 3' | Excitation (nm) | Emission (nm) | Alternative |
---|---|---|---|---|---|---|
ROX | details | – | details | 588 | 608 | ATTO Rh101 (NHS Ester) |
TAMRA | – | – | details | 559 | 583 | N/A |
TAMRA (NHS Ester) | details | details | details | 559 | 583 | N/A |
TEX™ 615 | details | – | details | 596 | 613 | Texas Red®-X (NHS Ester) |
TEX 615 is a trademark of Thermo Fisher Scientific, and Texas Red is a registered trademark of Molecular Probes, Inc.
ROX (NHS Ester): ROX (carboxy-X-rhodamine) is available only as an NHS ester; therefore, it must be attached to an amino-modified oligonucleotide. It has spectral properties similar to Texas Red.
TAMRA: This phosphoramidite modification is only available at the 3' end of an oligonucleotide. This was used as a quencher in first generation real-time PCR.
TAMRA (NHS Ester): The internal and 3' versions of this modification are attached to the oligonucleotide through a dT base; therefore, a dT nucleotide will be added at the position of these modifications. To avoid adding an extra nucleotide, replace an existing T nucleotide in your sequence with the required modification.
TEX 615: A red wavelength dye commonly used in multiplex reactions with FAM or in fluorescence-activated cell sorting (FACS) and microscopy applications using the rhodamine filter. TEX 615 can be used as a direct substitute for Texas Red or CAL Fluor 610.
Dye | 5' | Internal | 3' | Excitation (nm) | Emission (nm) | Alternative |
---|---|---|---|---|---|---|
ATTO 488 | details | – | details | 502 | 522 | Alexa Fluor® 488 |
ATTO 532 | details | – | details | 534 | 554 | VIC® |
ATTO 550 | details | – | details | 560 | 575 | Alexa Fluor 555 |
ATTO 565 | details | – | details | 570 | 591 | PET™ |
ATTO Rho101 | details | – | details | 592 | 609 | ROX |
ATTO 590 | details | – | details | 602 | 624 | Alexa Fluor 594 |
ATTO 633 | details | – | details | 635 | 653 | LIZ® |
ATTO 647N | details | – | details | 649 | 662 | Alexa Fluor 647 |
Alexa Fluor fluorophores are registered trademarks of Molecular Probes, Inc.; VIC and LIZ are registered trademarks of Thermo Fisher Scientific; PET is a trademark of Thermo Fisher Scientific.
ATTO dyes are patented fluorescent markers that feature strong absorption, high photostability, and high fluorescence quantum yield [1]. ATTO dyes can be used as substitutes for dyes such as ROX, VIC, LIZ, and Alexa Fluor dyes. Common applications for ATTO dyes include fluorescence in situ hybridization (FISH), fluorescence resonance energy transfer (FRET), and dual-labeled probes used in real-time PCR experiments. For real-time PCR applications, dye calibration will be needed for each real-time PCR instrument.
Dye | 5' | Internal | 3' | Excitation (nm) | Emission (nm) | Alternative |
---|---|---|---|---|---|---|
TYE 563 | details | – | details | 549 | 563 | Cy 3 |
TYE 665 | details | – | details | 645 | 665 | Cy 5 |
TYE 705 | details | – | – | 686 | 704 | Cy 5.5 |
TYE fluorophores are licensed from Thermo Fisher Scientific.
TYE dyes are proprietary fluorophores from IDT that are available for commonly used dye wavelengths. The numerical value in the name of these dyes represents the emission wavelength when attached to an oligo.
TYE 563: A bright fluorescent dye that can be used in microarray applications. TYE 563 can be used as a direct substitute for Cy 3.
TYE 665: A bright fluorescent dye that can be used in microarray applications. TYE 665 can be used as a direct substitute for Cy 5.
TYE 705: A bright fluorescent dye that can be used in microarray applications. TYE 705 can be used as a direct substitute for Cy 5.5.
Additional fluorophores (which may include licensing restrictions) are available. Click here to see our full catalog of fluorophore modifications.
We do not recommend PAGE purification of Cy-labeled oligonucleotides. Ammonium persulfate, a cross linking agent used in place of urea, is a component of the acrylamide gel that can damage the dye.
Ammonium persulfate oxidizes the double bonds in the chain between the rings, affecting the dye's ability to fluoresce when excited. HPLC purification, however, does not oxidize Cy dyes and is required for these modifications.
We do not recommend PAGE purification for dye labeled oligos due to the presence of ammonium persulfate, a component of the PAGE gel. Ammonium persulfate can break linkages and may damage the ring structures that comprise many fluorescent dyes.
At IDT, PAGE gels are exposed to UV light when the oligos are excised from the gel. UV light exposure can also damage fluorescent dyes. HPLC purification provides a pure product without damaging fluorescent modifications.
To determine what dyes are compatible with your instrument, download our Real-time qPCR assay design guide or take a look at the PrimeTime™ Multiplex Dye Selection Tool.
Currently, the IDT ZEN quencher is available with FAM, HEX, TET, Yakima Yellow® (ELITech Group), JOE™ (Thermo Fisher Scientific), MAX™, and SUN™ fluorophores. Double-quenched probes have significantly lower background fluorescence, especially for longer probes.
The ZEN quencher is available on PrimeTime™ qPCR Probes and on the probes supplied with PrimeTime qPCR Probe Assays. For any special oligonucleotide requests that include the ZEN quencher but are not found on our website (non-catalog requests), please contact us.
For more information, see our DECODED™ article, Double-quenched probes increase qPCR sensitivity and precision.
5′ Cy dyes are attached to the 5' hydroxyl group of the sugar via a phosphodiester bond.
3' Cy dyes are attached to the 3' hydroxyl group of the sugar via a phosphodiester bond.
Internal Cy dyes are attached to the backbone via the phosphodiester bonds of the bases between which the dyes occur.
VIC is a proprietary modification owned by Applied Biosystems (Life Technologies). SUN™ is a fluorophore offered by IDT that is a molecular equivalent to VIC and available for qPCR probes and custom DNA and RNA oligos.
We suggest checking that your fluorescent detection instrument is calibrated for the dye you choose or can identify the dye once calibrated. If choosing dye combinations for multiplex qPCR, IDT offers the PrimeTime™ Multiplex Dye Selection Tool to help you find the best combination of dyes for your specific qPCR instrument.
The stability of fluorescently labeled oligos and fluorophore function is similar to the stability of a standard oligo.
IDT recommends oligos that are to be stored long term should be stored frozen at –20°C. If the oligos are going to be resuspended, storage in a TE buffer such as IDTE (10 mM Tris, 0.1 mM EDTA, pH 7.5–8.0) is better than using water (non-DEPC treated). The impact from the type of storage medium used is marginal at –20°C, but becomes more important at higher temperatures (see the DECODED™ article, Storing oligos: 7 things you should know, for the data).
With fluorophores, it’s important to remember that exposure to natural light or ozone can negatively impact stability. If fluorescently modified oligos will be exposed to sustained light, protective cover from the lighting source (e.g., using brown tubes and/or foil covering) should be considered.
IDT offers a free Real-time qPCR assay design guide that contains additional information on available dyes and instrument compatibility.
The extinction coefficient "at maximum absorbance" refers to the extinction value that a given molecule has at its unique absorption maximum.
The extinction coefficient "not at absorbance maximum" refers to the extinction coefficient at 260 nm, which is the wavelength used to determine optical density.
See the DECODED article about quantifying your oligo here.
NED is an Applied Biosystems (Life Technologies) product. However, IDT can label oligos with ATTO 550, which is very similar to NED in both its excitation and emission spectra.
Depending on the machine you are using for identification, calibration may be needed, especially if you are performing multiplex qPCR.
We strongly recommend resuspending and storing fluorescently labeled oligos in a buffered solution such as TE (10 mM Tris pH 8.0, 0.1 mM EDTA) at ‒20°C. This will help increase the shelf life of your dye labeled oligos.
Also, avoid unnecessary freeze-thaw cycles by preparing a freezer stock solution (100 µM) and several working aliquots. Use the IDT Resuspension Calculator under the SciTools™ tab of the IDT website for help determining volumes to use.
We offer a large variety of fluorophores available for both RNA and DNA. We can label the oligos at 5', 3', and internal positions. A list of fluorophores available can be found under Products > Oligo modifications > Fluorophores.